Krzywki
A large range of cams are available. Cams can be straight, 450 cranked or 900 cranked. Cams can also be notched on either edge as required.
Cams can be fitted at 3, 6, 9 or 12 o’clock as shown. Please specify following details when ordering
1. For all cams:
- Cam reference, if known.
- Cam position, when locked.
- Dimension B.
2. For cranked cams:
- Whether cranked towards head or away from head.
- Dimension A (alternatively please quote dimension X).
3. For notched cams when viewed from front of lock:
- If fitted at 6 or 12 o’clock specify whether notch is on Left or Right hand side.
- If fitted at 3 or 9 o’clock specify whether notch faces upwards or downward.
| CAM POSITION | CAM MOVEMENTS |
EXAMPLE CHOOSE CAM POSITION WHEN LOCKED (VIEW FROM FRONT) |
 MOVEMENTS CAM MOVEMENTS TO LOCK/UNLOCK CORRESPOND TO THE KEY MOVEMENTS. PLEASE SEE KEY MOVEMENTS PAGE. |
| DIMENSION ‘X’ | |||
 LENGTH OF HOUSING |
 LENGTH OF HOUSING |
 LENGTH OF HOUSING |
“X” DIMENSION IS THE DISTANCE BETWEEN THE UNDERSIDE OF LOCK HEAD AND INSIDE FACE OF THE CAM “A” IS DIMENSION TO BE SPECIFIED ON CAM NUMBER SEE STANDARD CAMS & MINI CAMS |
| DIMENSION ‘B’ | |||
 |
 |
“B” DIMENSION - IS THE WORKING LENGTH OF CAM MEASURED FROM CENTRE OF LOCK. N.B. WITH A NOTCHED CAM STATE “NOTCHED - LEFT” (SHOWN) OR “NOTCHED - RIGHT”. | |
Standard Cams & Mini Cams
| UNDERSTANDING THE 7 FIGURE CAM REFERENCE | ||||||
|---|---|---|---|---|---|---|
| 1st Number | 2nd Number | 3rd Number | 4th & 5th Number | 6th & 7th Number | ||
| CAM PIERCING | CAM THICKNESS | SHAPE |
DIMENSION 'A' IN 0.4mm INCREMENTS SEE TABLE BELOW |
DIMENSION 'B' IN MILLIMETRES (mm) |
||
|
6= 8 mm sq 
FOR STANDARD CAMLOCK IF DIFFERENT WE WILL SPECIFY |
3 = 2.8mm |
0 |
 |
 |
||
1 |
||||||
2 |
4th & 5th No.s |
SIZE IN mm |
CAM TYPE |
W = mm |
||
3 |
||||||
|
M = 
FOR MINI CAMLOCKS |
2 = 2mm |
4 |
02 04 08 12 14 16 20 24 28 32 |
0.8 1.6 3.2 4.8 5.6 6.4 7.9 9.5 11.1 12.7 |
M T 6 |
12.7 14.3 15.5 |
5 |
||||||
6 |
||||||
7 |
||||||
8 |
||||||
9 |
||||||
|
T = 
FOR OFFICE FURNITURE & SOME CAMLOCKS |
||||||
NOT ALL CAM VARIATIONS MAY BE AVAILABLE, REFER TO PAGE STANDARD CAMS |
||||||
Standard Cams
| STRAIGHT CAMS - 2.8mm THICK | CRANKED CAMS - 2.8mm THICK | ||||||
|---|---|---|---|---|---|---|---|
 |
DIM 'B' |
PRODUCT |
 |
DIM 'A' |
DIM 'B' |
PRODUCT |
|
| 20 22 30 34 36 38 44 46 48 51 54 |
6310020 6310022 6310030 6310034 6310036 6310038 6310044 6310046 6310048 6310051 6310054 |
1.6 3.2 4.8 6.4 7.9 |
22 30 34 38 48 54 70 21 29 33 35 37 47 53 69 28 32 34 36 46 52 68 27 31 33 35 45 51 67 26 30 32 34 44 50 66 |
6340422 6340430 6340434 6340438 6340448 6340454 6340470 6340821 6340829 6340833 6340835 6340837 6340847 6340853 6340869 6341228 6341232 6341234 6341236 6341246 6341252 6341268 6341627 6341631 6341633 6341635 6341645 6341651 6341667 6342026 6342030 6342032 6342034 6342044 6342050 6342066 |
|||
| STRAIGHT NOTCHED CAMS - 2.8mm THICK | 90° CRANKED & NOTCHED CAMS - 2.8mm THICK | ||||||
 |
DIM 'B' | PRODUCT REF. No. |
 |
DIM 'A' |
DIM 'B' |
PRODUCT |
|
| 16 24 28 30 32 42 48 |
6320016 6320024 6320028 6320030 6320032 6320042 6320048 |
1.6 3.2 4.8 6.4 7.9 |
24 28 30 32 42 48 23 27 29 31 41 47 26 28 30 40 46 25 27 29 39 45 24 26 28 38 44 |
6370424 6370428 6370430 6370432 6370442 6370448 6370823 6370827 6370829 6370831 6370841 6370847 6371226 6371228 6371230 6371240 6371246 6371625 6371627 6371629 6371639 6371645 6372024 6372026 6372028 6372038 6372044 |
|||
Cams for Radial Pin Tumbler locks
| LOCKING CAMS FOR USE WITH RADIAL PIN TUMBLER CAM LOCKS. STANDARD THICKNESS 2.8MM - STANDARD FINISH ZINC PLATED | ||||||||
|---|---|---|---|---|---|---|---|---|
 |
PART No. | DIM 'B' | 
RETAINER PART. No. 70076-0100 |
TWO-POINT CAM PART. No. 65275-0120 |
||||
| 65287-0100 65287-0200 65287-0300 65287-0400 65287-0500 65287-0600 65287-0700 65287-0800 65287-0900 |
50 38 35 32 48 54 28.5 25.5 40.0 |
|||||||
|
A FURTHER SELECTION OF CAMS IS AVAILABLE ON REQUEST |
RETAINER PART. No. 70063-0100 |
THREE-POINT CAM PART. No. 65283-0120 |
||||||
 |
PART No. | DIM'B' | ||||||
| 65274-0100 65274-0200 |
22,2 34,0 |
|||||||
 |
 |
 |
PART No. | DIM. B. | ||||
| 65273-0100 65282-0100 |
31 23 |
|||||||
| PART No. | DIM. A. | DIM. B. | PART No. | DIM. A. | DIM. B. |  |
||
| 65265-0100 65265-0200 65265-0300 65265-0400 65265-0500 65265-0600 65266-0100 65266-0200 65266-0300 65266-0400 65266-0500 65266-0600 65271-0100 65271-0200 65271-0300 65271-0400 65271-0500 65271-0600 65344-0100 65344-0200 65347-0100 |
3,2 3,2 3,2 3,2 3,2 3,2 2,4 2,4 2,4 2,4 2,4 2,4 4,5 4,5 4,5 4,5 4,5 4,5 6,0 6,0 7,8 |
35 25,5 28,5 40 21 32 31,8 20,7 40 22 30 60 31,8 40 35 25 60 30 28 32 38 |
65277-0100 65277-0200 65277-0300 65277-0400 65277-0500 65277-0600 65280-0100 65280-0200 65296-0100 65296-0200 65296-0300 65296-0400 65298-0100 65298-0200 65299-0100 65299-0200 65299-0300 65300-0100 65300-0200 65300-0300 |
2,4 2,4 2,4 2,4 2,4 2,4 4,5 4,5 10,5 10,5 10,5 10,5 7,8 7,8 6 6 6 3,2 3,2 3,2 |
32 30 25,5 22,5 40 47 37 40 55 59 42 35 37,5 34,0 32 48 44 40 35 28,5 |
|||
| PART No. | DIM. A. | DIM. B. | ||||||
| 65285-0100 65285-0200 65285-0300 65285-0400 |
14,5 14,5 14,5 14,5 |
32 40 52 23 |
||||||
Cams for Handles
| 2-POINT CAMS | |
|---|---|
 6523360 |
 B5250 |
| 3-POINT CAMS | |
 6523390 |
 B5233 |
 B5238 STARLOCK FIXING WASHERS AVAILABLE
|
 B5165 STARLOCK FIXING WASHERS AVAILABLE
|
2 Point, 3 Point and Caulking Cams
| 2-POINT CAMS | 3-POINT CAMS | |||
|---|---|---|---|---|
|
DRIVE CAM  WITH STUMPS PART No. 6521820 WITHOUT STUMPS PART No. 6521821 |
 |
|||
| We have a range of special cams cranked towards, or away from, the handle. Details available on request. For large quantity orders a special cam can be produced to suit customers requirements |
PART No. 6522680 6523291 6522650 6522750 |
DIMENSION B 36 44 60 63 |
||
| CAULKING CAMS | RETAINING PLATE | RETAINING PLATES | ||
|
PART No.6523160  ALL CAMS SUPPLIED TO ‘B’ DIM TOLERANCE ± 1.0mm |
 No. 6521860 |
 FOR USE ONLY WITH HANDLES |
||
Cams & Accessories for IP Rated Locks
| CAMS | |||
|---|---|---|---|
 |
|||
| PRODUCT REFERENCE NUMBERS | |||
| DIM 'X' | DIM 'A' | PART NUMBER | |
| 16 | 0 | 6525301 | |
| 20 | 4 | 6525302 | |
| 25 | 9 | 6525303 | |
| 30 | 14 | 6525304 | |
| 35 | 19 | 6525305 | |
| 40 | 24 | 6525306 | |
| 45 | 29 | 6525307 | |
| 50 | 34 | 6525308 | |
| NOTE: DIMENSIONS 'X' IS IDENTICAL WHEN CAM IS USED ON PRODUCTS 0011, 0012, 0013, 0014, 0021,0022, 0023, 0024 OR 0025. NOT SUITABLE FOR 2609 | |||
| KEYS FOR SPANNER LOCKS | |||
 |
|||
| 8 TRIANGULAR | 7 SQUARE | DOUBLE BARB | DOUBLE BARB |
KEY FOR 00139304673 |
KEY FOR 00129304671 |
KEY FOR 00149304672 |
KEY FOR 00119304670 |
